|
Company News
HEXCORDER Millennium 11 CIPS+DCVG+DVM+GPS
"NEW" "NOW" Capture Waveforms with your CATH-TECH™ HEXCORDER Survey Equipment
"NEW" Waveform Software "NEW" Waterproof Mini Logger
"NEW' Smart Logger with GPS
The CATH-TECH™ Smart Logger was developed for Telluric and Stray current correction of CIPS and DCVG data to allow fixed position logging of the rectifier ON and Instant OFF potentials on the same frequency as the rectifier interruption cycle
"NEW" Remote Control
The SRC-4 has been upgraded with all new circuit boards and the latest integrated circuits. The SRC-4 can be equipped with GPS engines for synchronization of multiple rectifiers. The SRC-4 can be installed in existing rectifiers to up-grade them from Tap Changers to remotely controlled constant current/voltage or autopotential control. The SRC-4 equipped with the CATH-TECH™ intelligent Solar Software is the ideal tool for operation of Solar Systems.
Remotely Controlled and Monitored Rectifiers
Silver-Silver-Chloride Reference Electrodes
CATH-TECH™ manufactures AgAgCl and Carbon reference electrodes for use in reinforced concrete structures. All of our reference electrodes are serial numbered and come with a certificate of calibration. Close Interval Surveys (CIPS)
©1997-2007 Cathodic Technology
Limited. All Rights Reserved
|
"NEW" CATH-TECH™
has developed the worlds best survey instrument with full CIPS
and DCVG capability, the new HEXCORDER Millennium 11 comes
with a 12 satellite GPS engine for accurate location as well as 1M
byte of memory and the CATH-TECH™ exclusive "Waveform
Software". Of course like all CATH-TECH™
HEXCORDER's, the Millennium can measure distance and time stamp each reading.
The
CATH-TECH™ Waveform Software captures
2,000 readings per second over the programmed interruption cycle, use
it to prove synchronization of the current interrupters or to analyze
interference on the pipe line. Standard on the Millennium, optional
on the CIPS and DCVG HEXCORDERS.
"NEW
" Solar SRC-4
The
SRC-255 and SRC-255DCS have been chosen for installation on the
Clyde Tunnel in Scotland (180 circuits), the Hampton Roads Project in
Virginia (90 circuits) and numerous other projects worldwide. The
SRC-255 and SRC-255 DCS are remotely controlled and remotely monitored.
We
manufactured and shipped eight oil cooled SRC-4 Microprocessor
controlled autopotential rectifiers operating from 480 volt 3 phase
AC power, with a DC output capability of 48 volts, 250 amps to
Indonesia. These rectifiers destined for the cathodic protection of
an LNG dock are equipped for remote control and remote monitoring.
CATH-TECH™
employees completed over 1,000 Km. of GPS Synchronized close
interval (CIPS) survey in 2004.